Instructions / Assembly

No tools required for assembly and installation.

FOR FIRST TIME USE : Remove pull tab

between the top cover (1) and housing (3).

(Fig.1)

ASSEMBLY AND INSTALLATION INSTRUCTIONS:

Fig.3

Fig.2

Fig.1

CHARGING THE BATTERY:

For optimum performance, it is best to install the solar lights in full sunlight and charge

for 10-12 hours. Allow the light to run at least 8-12 entire charging and discharging

cycles to reach battery’s maximum capacity.

Page 4

A. Ground mount style.

Attach the shepherd’s hook (5) and post (6)

to stake (7), firmly put housing (3) on

shepherd’s hook (5). Push the assembly firmly

into the ground- DO NOT use a hammer. For

ground with hard soil, to prevent breaking the

stake (7), use trowel to loosen soil first. (Fig.2)

Two styles for installation.

B. Table mount style. (Fig.3)