Installation Guide

Assembly — Finishing the Fan Motor Installation
B
B
DD
DD
A
5
Tightening the screws
□ Loosen two of the four mounting bracket screws (DD)
from the mounting bracket (A), and remove the other
two screws (DD).
□ Remove the fan motor assembly (B) from the
mounting bracket (A) hook, and engage the key holes
with the two mounting bracket screws (DD)
previously loosened.
6
Attaching the fan motor assembly
to the mounting bracket
□ Install the two mounting bracket screws (DD)
previously removed, and tighten all four mounting
bracket screws (DD).
11 HAMPTONBAY.COM
Please contact 1-800-527-0998 for further assistance.