Installation Guide

8
Attaching the light kit mounting
plate to the mounting ring
9
D
HH
YY
B
II
E
D
B
□ Remove one of three mounting ring screws (HH) from
the mounting ring (YY) and loosen the other two
screws. (Do not remove)
□ Place the key holes in the light kit mounting plate (D)
over the two screws (HH) previously loosened from
the mounting ring (YY), turn the light kit mounting
plate (D) until it locks in place at the narrow section
of the key holes.
□ Secure by tightening the two mounting ring screws
(HH) previously loosened and the one (HH) previously
removed.
Attaching the light kit plate to
the mounting plate
□ While holding the light kit plate (E) under your fan (B),
make the polarized plug connections:
- White to white
- Black to black
□ Install the light kit plate (E) onto the light kit mounting
plate (D) with four light plate screws (II) provided. Be
sure to tighten all screws (II).
Assembly — Installing the Light Kit
13 HAMPTONBAY.COM
Please contact 1-800-527-0998 for further assistance.