Installation Guide

□ Install the 100 Watt halogen bulb (J) (included).

□ Raise the glass shade (F) up against the bottom of the

fan housing (B), and secure it to the fan by the

turning glass (F) clockwise until snug. Do not

overtighten.

□ Restore the power and your fan is ready for opera-

tion.

Finishing the light kit assembly

and mounting the glass shade

Assembly — Installing the Light Kit (continued)

WARNING: Before starting installation, disconnect the

power by turning off the circuit breaker or removing the fuse

at the fuse box. Turning power off using the fan switch is not

sufﬁcient to prevent electric shock.