Item #1000 513 328 Model #14710 USE AND CARE GUIDE ESSEX 3-LIGHT KITCHEN ISLAND PENDANT Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this light fixture. We strive to continually create quality products designed to enhance your home.
Table of Contents Hardware Included...................................................................3 Package Contents ....................................................................4 Installation ..................................................................... 5 Care and Cleaning ........................................................ 7 Troubleshooting............................................................ 7 Service Parts .................................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before installing. To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard. IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-855-HD-HAMPTON. NOTE: You may use three 60W type A bulbs or 13W SBCFL bulbs (sold separately).
Pre-Installation (continued) PACKAGE CONTENTS A B C D E F G H Part A B C D Description Mounting bracket Canopy assembly 12 in tube 6 in tube Quantity Part 1 1 2 1 E F G H 4 Description Decorative screw Fixture body Glass shade Socket ring Quantity 2 1 3 3
Installation 1 □ Preparing for the mounting bracket 2 Installing the mounting bracket □ Tighten the support screws (AA) into the inside mounting hole of the mounting bracket (A) (to be fully tightened later), and secure with hex nuts (G5/32 in.) (DD). Fasten the mounting bracket (A) onto the outlet box using two outlet box screws (CC). NOTE: The support screws (AA) should extend long enough to protrude through the canopy (B) when it is mounted.
Installation (continued) 4 □ Connecting the wires Strip 3/4 in. of insulation from the wire ends, and twist the stripped ends together with pliers. Connect the glossy/live wire from the fixture to the black wire from the outlet box, and the rough/neutral wire from the fixture to the white wire from the outlet box.
Care and Cleaning □ Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully. □ To clean the fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture. Troubleshooting Problem Possible Cause Solution The lights will not turn on. The bulb is burned out. Replace the light bulb. The power is off.
Service Parts MODEL TYPE: 14710 AA BB DD EE CC FF A B C D E F G H Part Description AA BB CC DD EE FF A Support screw Green ground screw Outlet box screw Hex nut (G5/32 in.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Artículo #1000 513 328 Modelo #14710 GUÍA DE USO Y MANTENIMIENTO LÁMPARA DE 3-LUCES COLGANTE SOBRE LA ISLA DE LA COCINA - ESSEX ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay, de 8 a.m. a 6 p.m., hora estándar del Este, de Lunes a Viernes 1-855-HD-HAMPTON HAMPTONBAY.COM GRACIAS POR TU COMPRA Apreciamos la confianza que has depositado en Hampton Bay al comprar esta lampara de araña.
Table of Contents Herramientas Necesarias.........................................................3 Aparillage Incluido ...................................................................3 Contenido del Paquete .............................................................4 Instalación ..................................................................... 5 Cuidado y Limpieza ...................................................... 7 Solucion de Problemas ................................................
Pre-Instalación PLANIFICAR UNA INSTALACIÓN EXITOSA Lea todas las instrucciones antes de comenzar la instalación. Para evitar dañar el producto, colócalo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón. IMPORTANTE: Revisa que el aislamiento de los cables no haya sufrido ningún corte, abrasión ni tenga filamentos de cobre expuestos debidos al envío. Si hay un defecto en el cable suspende el ensamblaje. Por favor llama a nuestro Equipo de Servicio al Cliente al 1-855-HD-HAMPTON.
Pre-Instalación (continuación) CONTENIDO DEL PAQUETE A B C D E F G H Pieza A B C D Descripción Soporte de montaje Conjunto de cubierta Tubo de 12 pulgadas Tubo de 6 pulgadas Cantidad Pieza 1 1 2 1 E F G H 4 Descripción Tornillo decorativo Cuerpo de la lampara Campana de vidrio Anillo del receptaculo Cantidad 2 1 3 3
Instalación 1 Preparando el soporte de montaje 2 Instalación del soporte de montaje □ □ Atornille los tornillos de soporte (AA) en los horificios del soporte de montaje (A) para luego ser apretado), y asegúrelo con las tuercas hexagonales de G5/32 pulgadas. (DD). Apriete el soporte de montaje (A) sobre la caja eléctrica usando los dos tornillos de la caja eléctrica (CC). NOTA: Los tornillos de soporte (AA) deben sobresalir lo suficiente a través del conjunto de cubierta (B)cuando esté montado.
Instalación (continuación) 4 □ □ □ □ Conectando los cables Pelar el aislamiento del extremo de los cables de 3 / 4 pulgadas y tuerze juntos, utilizando el alicate, los extremos desnudos de los cables del mismo color . Conecte el cable brilloso/positivo de la lámpara con el cable negro de la caja eléctrica, y el cable rugoso/neutral de la lámpara con el cable blanco de la caja eléctrica.
Mantenimiento y Limpieza □ □ No uses limpiadores con químicos, solventes ni productos abrasivos. Usa sólo un paño suave y seco para desempolvar o limpiar con cuidado.. Para limpiar la lámpara, primero corta el suministro de electricidad, apagando el interruptor automatico o retirando el fusible correspondiente en la caja de fusibles. Seguidamente, usa un paño limpio, seco o ligeramente húmedo (usa sólo agua limpia, nunca un solvente) para limpiar el interior de la lámpara.
Piezas de remplazo MODELO: 14710 AA BB DD EE CC FF A B C Pieza AA BB CC DD EE FF A D E F G H Descripción Pieza Tornillo de soporte Tornillo verde a tierra Tornillo de la caja eléctrica Tuerca hexagonal de G5/32 pulgadas Conector de cable Tuerca Soporte de montaje 8 Descripción B C D Conjunto de cubierta Tubo de 12 pulgadas Tubo de 12 pulgadas E Tornillo decorativo F G H Cuerpo de la lampara Campana de vidrio Anillo del receptaculo
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Hampton Bay, de 8 a.m. a 6 p.m., hora estándar del Este, de Lunes a Viernes 1-855-HD-HAMPTON HAMPTONBAY.COM Conserva este manual para referencias futuras.