Instructions / Assembly

Making the electrical connections

□ Strip 3/4 in. of insulation from the wire ends, and twist the

stripped ends together with pliers.

□ Connect the glossy/live wire from the fixture to the black

wire from the outlet box, and the rough/neutral wire from the

fixture to the white wire from the outlet box.

□ The bare copper grounding wire from the fixture must loop

one turn under the head of the green ground screw (CC) on

the mounting bracket (AA) before it is connected to the

grounding conductor of the supply circuit.

□ Cover the wires with wire connectors (GG). Tape the wire

connectors (GG) and wires together, and carefully position all

wires inside the outlet box.

NOTE: The glossy/live wire has the text printed on it;

the rough/neutral wire has the ridge on it.

Installing the canopy to the outlet

box

Installing the glass shade and light

bulbs

□ Raise the canopy (A) all the way up to the ceiling, and tighten

the ring (DD) onto the screw collar loop (EE) until the canopy

(A) is firmly held against the ceiling.

□ Unscrew the socket ring (E) from the socket. Set the glass

shade (D) onto the socket, and secure them with the socket

ring (E).

□ Install the light bulb (not included) into the socket. Use one

60-watt medium base bulb.

NOTE: You can also use one 13w maximum SBCFL bulb

(sold separately). Do not exceed the recommended

wattage.

Installation (continued)