Installation Guide

SUPPLY CIRCUIT
Ground
Conductor
Outlet Box
Green
Ground
Lead
Ground to
Downrod
BLACK
WHITEWHITE
BLACK
BLUE
GREEN
WHITE
BLUE
BLACK
WHITE
Figure 13
Diagram indicates optional light kit wiring.
Making the Electrical
Connections
Remember
Follow the steps below to connect the fan to
your household wiring. Use the wire
connecting nuts supplied with your fan.
Secure the connectors with electrical tape.
to shut off the power.
1. Connect the fan supply (black) wire and
light supply (blue) wire to the black
household supply wire. (Figure 13)
2. Connect the neutral fan (white) wire t o
the w hite neutral household wire. (Figure
12)
3. Connect the fan ground wire (green) to
the household ground wire. (Figure 13)
4. After connecting the wires, spread them
apart so that the green and white wires are
on one side of the outlet box and the black
and the blue wires are on the other side.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR OTHER PERSONAL INJURY. MOUNT FAN ONLY ON
AN OUTLET BOX OR SUPPORTING SYSTEM MARKED
ACCEPTABLE FOR FAN SUPPORT.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK. DO NOT USE THIS FAN WITH ANY SOLID-
STATE SPEED CONTROL DEVICE.
LIGHT KITS ARE AVAILABLE AT YOU HAMPTON
BAY RETAILER. THE FAN IS ALREADY WIRED TO
SUPPORT THE LIGHT KIT OPTION.
5. Turn the connecting nuts upward and push the wiring
into the outlet box. Figures 14 and Figures 15 illustrate the
wiring connections for optional wall control (available at
your Hampton Bay Retailer, the wire color out of wall
control may vary, see wall control's installation manual for
correct wire connections)
5
NOTE
WARNING
Registration
slot
Figure 12