YOW SKU # 661 250 Model # 151-101-5MOD-V5-NF USE AND CARE GUIDE TOBAGO 5 PIECE MODULAR SECTIONAL - NO FABRIC Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8.00 a.m. - 6.00 p.m., EST, Monday - Friday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU this 5 piece modular sectional. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Table of Contents Table of Contents.................................................... 2 Safety Information................................................... 2 Care Instructions...... ................................................ 2 Special Care Instructions about The Table Top.........................2 Pre-Assembly (Left Arm Chair Section).....................3 Planning Assembly/ Hardware Included / Package Contents...3 Pre-Assembly (Armless Chair Section)......................
Pre-Assembly (Left Arm Chair Section) The whole set includes one left arm chair section, one armless chair section, one right arm chair section, one table and one ottoman. Please lay out all parts prior assembly to verify all parts are included. PLANNING ASSEMBLY It will take two people about 20 minutes to complete the assembly process. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (Armless Chair Section) PLANNING ASSEMBLY It will take two people about 20 minutes to complete the assembly process. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. CC BB AA EE HH Part Description Quantity AA Bolt (M6x35) 6 BB Washer (D6) 10 CC Bolt cap Bolt (M6x48) Plastic clamp 10 4 2 EE HH PACKAGE CONTENTS 0.300 0.
Pre-Assembly (Right Arm Chair Section) PLANNING ASSEMBLY It will take two people about 20 minutes to complete the assembly process. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. CC BB AA Part Description Quantity AA Bolt (M6x35) 12 BB Washer (D6) 12 CC HH Bolt cap Plastic clamp 12 1 HH PACKAGE CONTENTS B2 A2 D2 E 比例 0.
Pre-Assembly (Table) PLANNING ASSEMBLY It will take two people about 10 minutes to complete the assembly process. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (Ottoman) PLANNING ASSEMBLY It will take two people about 10 minutes to complete the assembly process. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. Part GG CC BB Description II Quantity BB Washer 8 CC GG II Bolt cap 8 Bolt (M6x18) Bolt (M6x40) 4 4 PACKAGE CONTENTS J I Part Description Quantity I J Seat panel Side panel 2 K Seat pad 1 K 1 7 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (Left Arm Chair Section) 1 Attaching the side panel to the back panel □ Stand the back panel (B) on a flat, smooth surface. □ Hook the side panel (A) into the back panel (B) as shown below. Attach the side panel (A) to the back panel (B) with washers (BB) and bolts (AA) using the wrench (DD). IMPORTANT: Do not fully tighten bolts (AA) until the end of Step 3. B A A DD B AA BB 2 Attaching the seat panel □ Place the frame upside down on a flat, smooth surface.
Assembly (Left Arm Chair Section) 3 Attaching the L-shaped panel □ Attach the L-shaped panel (D) to the side panel (A), the seat panel (C) and the back panel (B) with washers (BB) and bolts (AA) using the wrench (DD). □ Fully tighten all the bolts (AA) when all of them are in place. B C BB AA DD BB AA DD D A BB AA DD A C DD AA BB D B 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (Left Arm Chair Section) 4 Covering the bolts □ Cover all the bolts (AA) with bolt caps (CC). A C CC D B 5 Placing the cushions □ Place the cushions (E and F) on the sectional chair. □ Adjust the foot glides to stabilize the sectional chair.
Assembly (Armless Chair Section) 1 Attaching the seat panel to the back panel □ Place the back panel (B1) upside down on a flat smooth surface. □ Attach the seat panel (C1) with a washer (BB) and a bolt (AA) using the wrench (DD). IMPORTANT: Do not fully tighten the bolt (AA) until the end of Step 3. C1 DD AA BB B1 2 Attaching the U-shaped panel □ Align the U-shaped panel (D1) to the seat panel (C1) and the back panel (B1) . C1 B1 D1 11 HAMPTONBAY.
Assembly (Armless Chair Section) 3 Attaching the U-shaped panel (continued) □ Secure the U-shaped panel (D1) to the back panel (B1) and the seat panel (C1) with washers (BB) and bolts (AA and EE) using the wrench (DD). □ Fully tighten all the bolts (AA and EE) when all the bolts are in place.
Assembly (Armless Chair Section) 4 Covering the bolts □ Cover all the bolts (AA and EE) with bolt caps (CC). CC 5 Placing cushions □ Place the seat cushion (E) and the back cushion (F) on the armless chair section. □ Adjust foot glides to stabilize the armless chair section. F E 13 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (Right Arm Chair Section) 1 Attaching the side panel to the back panel □ Stand the back panel (B2) on a flat, smooth surface. □ Hook the side panel (A2) into the back panel (B2) as shown below. Attach the side panel (A2) to the back panel (B2) with washers (BB) and bolts (AA) using the wrench (DD). IMPORTANT: Do not fully tighten bolts (AA) until the end of Step 3. B2 B2 A2 A2 BB AA DD 2 Attaching the seat panel □ Place the frame upside down on a flat, smooth surface.
Assembly (Right Arm Chair Section) 3 Attaching the L-shaped panel □ Attach the L-shaped panel (D2) to the side panel (A2), the seat panel (C) and the back panel (B2) with washers (BB) and bolts (AA) using the wrench (DD). □ Fully tighten all the bolts (AA) when all of them are in place. C B2 BB AA DD DD AA BB D2 A2 DD AA BB C BB AA A2 DD D2 B2 15 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (Right Arm Chair Section) 4 Covering the bolts □ Cover all the bolts (AA) with bolt caps (CC). C A2 CC D2 5 Placing cushions □ Placing the cushions (E and F) on this chair section. □ Adjust the foot glides to stabilize this chair section.
Assembly (Table) 1 Attaching table legs 2 Attaching bolt caps □ Place the table top (G) upside down on a flat, smooth surface. □ □ Attach the table legs (H) to the table top (G) with washers (BB) and bolts (FF). Fully tighten the bolts (FF) with the wrench (DD). Cover all bolts (FF) with bolt caps (CC). CC DD FF FF H BB G 3 Stabilizing the table □ Turn the table upright. □ Adjust the foot glides to stabilize the table. 17 HAMPTONBAY.
Assembly (Ottoman) 1 Attaching side panels to the seat panel 2 □ Place the seat panel (I) upside down on a flat, smooth suraface. □ Attach side panels (J) to the seat of seat panel (I) with washers (BB) and bolts (II and GG) using the wrench (DD). □ Completely tighten all the bolts (II and GG). BB II □ DD I DD CC J 3 Placing the seat pad □ Turn the ottoman upright. □ Place the seat pad (K) on the ottoman. Cover all the bolts (II and GG) with bolt caps (CC).
Assembly (3-Seat Sofa) Use plastic clamps (HH) to secure the left arm chair section and the right arm chair section to the armless chair section to form a 3-seat sofa. See diagram below. Secure cushions to the 3-seat sofa with hook and loop strips. HH Warranty 2 YEAR FRAME AND WEAVE LIMITED WARRANTY WHAT IS COVERED We warrant the frame and weave to be free of manufacturing defects to the original purchaser for two years.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8.00 a.m. – 6.00 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.