Instructions / Assembly

All Hampton Bay lamp bases and shades (not included) are packaged by color and letter code to indicate the proper size and safety of
matched combinations. To reduce the risk of fire and to avoid the fixture from tipping over, use only these combinations and do not exceed
recommended maximum wattage. Please see the Shade Specifications for alternate shade sizing.
Assembly Instructions
ASSEMBLING THE LAMP
1
Insert the harp (B) prongs into the saddle (2) and slide the
retaining covers (1) over the joints to secure the harp (B).
Unscrew the finial (A) from the harp (B), then place the shade
(not included) onto the harp (B) and secure with the finial (A).
Install a 100-watt maximum standard type A bulb (not
included) or a Max 23W self-ballasted fluorescent bulb (not
included).
NOTE: The diagram illustrates the assembly of your
new lamp. This is a representative drawing and is not
intended to match the style of your lamp.
Troubleshooting
Problem Possible Cause Corrective Action
The bulb will not light. The bulb is burned out. Replace the light bulb.
The power is off.
The cord is not plugged in.
The circuit breaker is off.
There is an exposed wire.The fuse blows or the circuit breaker trips when
light is turned on.
Ensure the power supply is on.
Ensure the cord is plugged into the outlet.
Ensure the circuit breaker is set to the ON
position.
Discontinue use. Unplug the unit from the wall
and contact a qualified electrician or call the
Customer Service Team at 1-855-HD-HAMPYON.
To ensure your new table lamp is working properly, plug
it into a wall outlet and turn on the switch. Save these
instructions for future use.
Package Contents
A
1
B
2
3
Part
A
B
C
Description
Finial
Harp
Base
Quantity
1
1
1
A
B
C
TABLE LAMP
Use and Care Guide

Summary of content (4 pages)