Instructions / Assembly

Pre-Installation

PLANNING INSTALLATION

Read all instructions before installing.

To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.

IMPORTANT: Inspect the wire insulation for any

cuts, abrasions, or exposed copper that may have

occurred during shipping. If there is a defect in the

wire, do not attempt installation. Please call the

Customer Service Team at 1-855-HD-HAMPTON.

TOOLS REQUIRED

Phillips Wire Pliers

Screwdriver Stripper

Safety Electrical

Goggles Tape

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

AA BB CC

DD EE FF

GG HH II

NOTE: You may use two 60W medium base (E26)

type A bulbs or 13W SBCFL bulbs (sold separately).

Part Description Quantity

AA Support screw 2 FF Cap nut 2

BB Green ground screw 1 GG Metal washer 2

CC Outlet box screw 2 HH Plastic washer 2

DD G5/32 in. Hex nut 2 II G3/8 in. Hex nut 1

EE Wire connector 3 JJ Finial 1