Instructions / Assembly

ManualsBrandsHampton Bay ManualsLamps & ShadesMix & Match Antique White Baluster Accent Lamp Base

All Hampton Bay lamp bases and shades (not included) are packaged by color and letter code to indicate the proper size and safety of

matched combinations. To reduce the risk of fire and to avoid the fixture from tipping over, use only these combinations and do not exceed

recommended maximum wattage. Please see the Shade Specifications for alternate shade sizing.

Assembly Instructions

ASSEMBLING THE LAMP

Place the shade (not included) onto the socket (1) of the

base.

Install a 40-watt maximum standard type A bulb (not

included) or a Max 13W self-ballasted fluorescent bulb

(not included).

To ensure your new accent lamp is working properly,

plug it into a wall outlet and turn on the switch. Save

these instructions for future use.

NOTE: The above diagram illustrates the assembly

of your new lamp. This is a representative drawing

and is not intended to match the style of your lamp.

Troubleshooting

Problem Possible Cause Corrective Action

The bulb will not light. The bulb is burned out. Replace the light bulb.

The power is off.

The cord is not plugged in.

The circuit breaker is off.

There is an exposed wire.The fuse blows or the circuit breaker trips when

light is turned on.

Ensure the power supply is on.

Ensure the cord is plugged into the outlet.

Ensure the circuit breaker is set to the

ON position.

Discontinue use. Unplug the unit from the wall

and contact a qualified electrician or call the

Customer Service Team at 1-855-HD-HAMPYON.

Maintenance

1. Use only a dry soft cloth to dust or wipe carefully.

2. Do not use any cleaners with chemicals, solvents or harsh abrasives.

3. Do not immerse  xture in water. Doing so will damage the wire.

ACCENT LAMP

Use and Care Guide

Summary of content (4 pages)

PAGE 1
Use and Care Guide ACCENT LAMP All Hampton Bay lamp bases and shades (not included) are packaged by color and letter code to indicate the proper size and safety of matched combinations. To reduce the risk of fire and to avoid the fixture from tipping over, use only these combinations and do not exceed recommended maximum wattage. Please see the Shade Specifications for alternate shade sizing. Assembly Instructions 1 ASSEMBLING THE LAMP Place the shade (not included) onto the socket (1) of the base.
PAGE 2
Shade Specifications WARNING: ALTERNATE SHADE SIZING. The recommended shades shown on the back of the lamp package are properly sized for use with the lamp. If an alternate shade is used, measurements must be checked according to the Specifications this section. Caution: Using an oversized shade may cause fixture to easily tip over. Choose bulb wattage. Do not exceed socket label rating. Find the minimum Cylinder Diameter (CD) of a shade that matches your selected bulb wattage.
PAGE 3
Guía de Uso y Mantenimiento LAMPARA DECORATIVA Todas las bases y pantallas (no incluidas), Hampton Bay, están empacadas por color y un código de letra que indica el tamaño adecuado y la seguridad de las posibles combinaciones. Para reducir el riesgo de incendio y evitar la caída de la lámpara, use solo las combinaciones sugeridas y no exceda el watage máximo recomendado. Por favor, refiérase a las especificaciones de las pantallas para tamaños alternativos.
PAGE 4
Especificaciones de las pantallas ATTENCION: TAMANO DE PANTALLA ALTERNATIVA. El tamaño de la pantalla que aparece en la parte de atrás de la caja de la lámpara es el tamaño propiamente recomendado que se debe usar con esta lámpara. Si desea utilizar un tamaño alternativo, asegúrese de verificar las dimensiones acorde a las especificaciones en esta sección. CUIDADO: El uso de una pantalla mas grande de lo recomendado, puede causar la caída de la lámpara por desbalance. Seleccione el watage de la bombilla.