Installation Guide

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
5 Glass Shade (#4) 1 Glass Shade (#6) 5 Metal Ring (#7) 5 Screw Shell (#3)
5 Drop Rod (#2) 1 Spanner (#8)
ASSEMBLY INSTRUCTIONS:
1. Shut off power at the fuse box or circuit breaker box, if necessary remove old fixture
and all mounting hardware from outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area, Take care
not to lose any small parts necessary for installation.
3. Place Glass Shade (#6) to Fixture Body and hang Metal Ring (#7) to Arm (#9).
4. Connect Drop Rod (#2) to Light Assembly (#1) and Metal Ring (#7).
5. Place Glass shade (#4) over the Socket (#5), fasten with Screw shell (#3) by using
the included Spanner (#8).