Installation Guide

Completely tighten all bolts (AA) once all bolts (AA) are in place. Cover all bolts (AA) with bolt caps (DD).
Attach the table legs (B) to the table top (A) with washers (BB) and bolts (AA) using hex wrench (CC).
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM
Do not fully tighten any of the bolts until
all of the bolts are properly positioned.
AA
BB
A
B
flat, smooth surface.
DD
Stabilizing the table
Turn the table up right.
Level the table with foot glides at the bottom of table legs.
CAUTION:
You must remove the umbrella from the table when not in use. Failure to do so may result
in damage to the table top. This type of damage is not considered under the limited warranty.
IMPORTANT: Please always have an umbrella base ready
if you plan to set an umbrella in the center of the table.