Instructions / Assembly

4
Installation
1
Installing the bulb
2
Opening the track contacts
on the light
□ Install the bulb (C) on the track head assembly (A).
NOTE: The bulb is not included with track lights sold in
Canada.
NOTE: Use GU10 bulbs with this track light.
□ Unthread the decorative collar (B) on the track
head assembly (A) until it disengages from the
threads and slides freely on the shaft. One
side of the connector will swing open
exposing the track contacts.
3
Attaching the track head
assembly to the track
4
Closing the track contacts
on the light
□ Align and insert the contacts on the track head
assembly (A) with the contact channel on the track
rail (1) (not included), making sure the “N” line
contact inserts into the upper channel, the “L” line
contact inserts into the lower channel, and the
ground tab (2) rests on the copper ground on top of
the track rail (1) (not included).
□ Close the connector tight and rethread the
decorative collar (B) to lock the track contacts
on the track head assembly (A) closed.
A
C
A
B
A
1
2
N
L
A
B