Instructions / Assembly

Installation (continued)
C
A
B
C
GG
6
□ Place the canopy of the  xture body (C) over the outlet box, and ensure the heads of the support screws (long) (BB) come through the
holes of back of the  xture body (C).
□ Tighten the cap nuts (GG) onto the protruding support screws (long) (BB) on the mounting bracket (AA) until the  xture body (C) is held
 rmly against the wall.
□ There are two installation options to choose from.
Installation Option 1:
Up light
Installation Option 2:
Down light
□ Unsrew the socket ring (A) from the socket on the  xture body
(C), and attach the glass shade (B) onto the socket on the  xture
body (C), and secure the glass shade (B) with the socket ring (A).
□ Install the light bulb (not included) into the socket. Use one 60-
watt medium base (E26) type A bulb or less.
4
Installing the  xture body to the outlet box
5
Installing the glass shade and light bulb
BB
AA
NOTE: You can also use one 9W maximum medium
base (E26) self-ballast LED bulb (sold separately). Do not
exceed the recommended wattage.