Installation Guide
12
Assembly (continued)
11
Attaching the back panels
□ Locate the back panel (D) and line them up to the back of
the media console with the nished side facing in.
□ Insert and tighten ten back panel screws (CC) to attach the
back panel (D) the media console.
□ Do not strip the screws (CC) by overtightening.
CC
GG
FF
12
Attaching hardware onto the doors
□ Locate the cabinet door (G) and place on a soft surface to
protect the nish.
□ Attach hinge (FF) to the cabinet doors (G) by inserting four
hinge screws (GG) and turning clockwise. Do not strip the
hinge screws (GG) by overtightening.
D
G