Installation Guide

Assembly (continued)

Attaching the base trim to base panel

□ Locate the base panel (B) and place on a soft surface to

protect the nish.

□ Attach the base trim (N) to the base panel (B) by turning four

bolts (AA) clockwise through the connectors. Do not trip the

bolt (AA) but overtightening.

□ Attach the two support panels (P) to the base panel (B) turning

four bolts (AA) clockwise through the connector. Do not strip

the bolts (AA) by overtightening.

Attaching top trim to side panels

□ Insert four wood dowels (BB) into the unthreaded holes

in the top trim (M)

□ Line up the four wood dowels (BB) in the top trim (M)

with the unthreaded holes in the left and right side panel

(J & H).

□ Press together rmly until ush.