Instructions / Assembly

4
1
Preparing the unit for assembly
3
4
Installing the light bulb
Installing the lamp shade
NOTE:
NOTE:
Do not exceed the maximum wattage.
Carefully unpack all the parts. Protect the assembly surface
to avoid scratching the lamp or the assembly surface.
Pull out any excess power cord through the floor lamp
base (A) during all assembly steps to prevent the cord from
becoming twisted.
Thread the bottom tube (B) into the floor lamp base (A).
Thread the middle tube 1 (C) into the bottom tube (B).
G
F
Thread the middle tube 2 (D) into the middle tube 1 (C).
Assembly
H
Thread the top tube (E) into the middle tube 2 (D).
2
Installing the socket assembly
Thread the socket assembly (F) into the top tube (E).
E
F
Remove the socket ring (H) from the socket assembly (F).
Place the shade (G) on the socket assembly (F) and secure
with the socket ring (H).
Install one 23 Watt CFL bulb (I) into the socket
assembly (F). You can also use a 100 watt type A bulb
or LED-equivalent energy-saving bulb (sold separately).
B
C
A
D
E
I
F