Use and Care Manual

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly - Assembling the Fan Without the Light Kit

Assembling the fan without the

light kit

□ Remove the three light kit mounting screws (MM) on the

black bracket below the fan-motor assembly (D).

□ In order to use the fan without the light kit, remove the

switch cup (WW) from the top of the light kit tter assembly

(E) by removing the center hex nut (NN) inside the switch

cup (WW), and then thread the switch cup (WW) off the

threaded nipple on the top of the light kit tter assembly (E).

□ Press the plastic plug (EE) (provided) into the center hole of

the switch cup (WW).

□ Connect the quick connect couplers. (The fan will not start

without this connection).

□ Position the switch cup (WW) onto the black bracket and

reinstall the light kit mounting screws (MM).

IMPORTANT: It is critical to attach the switch cup using the

quick connector. The fan will not operate unless the light kit

is connected to the fan.