Full Product Manual

ManualsBrandsHampton Bay ManualsSmart HomeWellston 44 in. LED Indoor Oil Rubbed Bronze Smart Ceiling Fan with Light Kit and WINK Remote Control

Control the Fan with the WINK App

INSTALLATION AND OPERATION

CEILING FAN WINK ENABLED REMOTE CONTROL

Safety Information

Warranty

CAUTION: Incorrect wire connections will

damage this receiver.

The supplier warrants the remote control and receiver to be free from defects in workmanship and material present at

time of shipment from the factory for a period of one year after the date of purchase by the original purchaser. We agree

to correct such defects without charge or at our option replace with a comparable or superior model if the product is

returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing

and reinstalling the product are your responsibility. Damage to any part such as by accident or misuse or improper

installation or by afxing any accessories, is not covered by this warranty. Servicing performed by unauthorized

persons shall render the warranty invalid. There is no other express warranty. Home Depot hereby disclaims any and

all warranties, including but not limited to those of merchantability and tness for a particular purpose to the extent

permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as

specied in the express warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the

above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages

arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some

states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may

not apply to you. This warranty gives specic legal rights, and you may also have other rights which vary from state to

state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the

warranty must be paid by the customer.

Contact the Customer Service Team at 1-855-HD HAMPTON or visit www.HAMPTONBAY.COM

Pre-Installation

TOOLS REQUIRED

Phillips

screw-

driver

Flathead

screw-

driver

Adjustable

wrench

Electrical

tape

Wire

cutter

Step ladder

Part Description Quantity

A Remote control 1

B Receiver 1

C AAA 1.5V battery 2

D Plastic wire connector 5

E White painting screw 1

F Rubber isolated pad 2

PACKAGE CONTENTS

IMPORTANT: This product and/or

components are governed by one or more

of the following U.S. Patents: 5,947,436;

5,988,580; 6,010,110; 6,046,416, 6,210,117

and other patents pending.

Installation

NOTE: The frequencies on your receiver

and hand unit have been preset at the

factory. Before installing the receiver, make

sure the dip switches on the receiver and

hand unit are set to the same frequency.

The dip switches on the hand unit are

located inside the battery compartment.

NOTE: The battery will weaken with age

and should be replaced before leaking

takes place as this will damage the hand

unit. Dispose of the used battery properly,

keep the battery out of the reach of

children.

Setting the codes on the

remote control and receiver

Operating Fan with the WINK App

1. YOU MUST SET CEILING FAN TO HIGH SPEED

AND LIGHT KIT (IF ANY) TO ON POSITION BEFORE

OPERATING REMOTE CONTROL.

2. The supply to the remote control receiver should

be connected through a mains switch, i.e. existing

wall switch.

3. Disconnect from power supply at wall switch before

working on remote control receiver or ceiling fan.

4. Install receiver into the ceiling fan canopy of the fan

to ensure proper protection.

5. This unit is to be used for the control of ceiling fan

and in a AC110/120V 60Hz power supply only.

6. Do not install in damp locations or immerse in

water. (For indoor use only.)

7. Do not pull on or cut leads shorter.

8. Do not drop or bump the unit.

9. Do not mix old and new batteries.

10. Do not mix alkaline, standard (carbon-zinc), or

rechargeable (ni-cad, ni-mh, etc.) batteries.

NOTE: It is imperative that the code used

for both transmitter and receiver is exactly

the same, otherwise remote controller will

not work.

Setting the Code on the Remote

□ Remove the battery cover on the back of

the remote control by pressing rmly on the

arrow and sliding the cover off.

□ Slide the code switches to your choice of

either up or down. The factory setting is up.

□ For fans with dimmable bulbs, slide the

“Light Function” switch (O/D) to the position

marked “D”. If you are using non dimmable

bulbs slide the “Light Function” switch to the

“O” position.

□ Install two 1.5V AAA batteries (included).

□ Replace the battery cover on the remote

control.

Setting the Code on the Receiver

□ Slide the code switches on the receiver to

the same positions as set on the remote

control.

Operating Your Remote Control

Operating the remote control

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

Any changes or modications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

FCC ID: KUJCE10406, KUJCE10407

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

1 2 3

1 2 3 4

D O

Remote

Control

Receiver

Dip Switch

FCC ID: KUJCE10319

IC ID:10786A-TR221A

MADE IN CHINA

MODELO: TR221A

FCC ID: KUJCE10319

IC ID: 10786A-TR221A

HECHO EN CHINA

MODèLE: TR221A

FCC ID: KUJCE10319

IC ID: 10786A-TR221A

FABRIQUé EN CHINE

1 2 3 4

DIP

Light Function

Switch

Press and release the button to turn the light on or off.

Downloading the WINK

Application

□ Using your smart device, navigate to the

application store (Apple App Store or Google

Play). Download the free WINK app and

create an account.

Connecting to the WINK Hub

□ Ensure your WINK Hub is connected to WiFi

by conrming the indicator light is a solid

blue color.

□ With the app open, select “add a product.”

□ Choose the WINK Hub and follow the

instructions on the app to add your fan.

Be sure your Hub is plugged in and

within range of your fan.

3:17 PMWi-Fi

53%

Cancel

Help

CEILING FAN

Pairing the Fan to the WINK Hub

□ When instructed, turn on your fan. Once pairing is successful,

the fan will turn on at low speed and the light will blink 5 times.

Operating Your Remote Control

Fan Speed

• OFF - Turns fan off

• 1- Turns the fan to Low speed.

• 2- Turns the fan to Medium speed.

• 3- Turns the fan to Medium 2 speed.

• 4- Turns the fan to High speed.

• BREEZE- Randomly alternates fan speeds to

create an organic breeze effect.

Fan Light

• OFF/ON - Turns fan light off or on.

Select and slide to dim or brighten light.

Questions, problems, missing parts? Before returning to the store, call Customer Service

8 a.m. - 6 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST Saturday

1-855-HD HAMPTON

HAMPTONBAY.COM

We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this remote control.

We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of

products available for your home improvement needs.

Thank you for choosing Hampton Bay!

Item #722-493

Model #99432

-Press and release the button to turn the fan on or off.

Press and hold the button for 3 seconds to use the “walk away

time delay”; this will activate the light for 30 seconds (if you are using

dimmable bulbs the light will be activated at 50% brightness.

- Fan Speed - LED’s on the fan speed button will illuminate to the

corresponding speed.

- Press button once - turns the fan on high speed.

- Press button twice - turns the fan on medium-high speed.

- Press button three times - turns the fan on medium-low speed.

- Press button four times - turns the fan on low speed.

Press button ve times - fan will turn off.

- Comfort Breeze

- Press and release the button to enable Comfort

Breeze

; this will change your fan speed randomly, simulating a

relaxing breeze. To cancel this feature press or .

- Timer

- While the fan is on press button once - turns on a 2 hour run timer.

- While the fan is on press button twice - turns on a 4 hour run timer.

- While the fan is on press button three times - turns on a 8 hour run timer.

- Light ON/OFF

If you are using dimmable bulbs and you have previously set the dip

switch in your remote control to the “D” position, press and hold the

button to activate the dimmer function.

CAUTION: To reduce the risk of re or injury, do

not use this product in conjunction with any

variable (rheostat) wall control.

NOTE: The battery will weaken with age and

should be replaced before leaking takes place

as this will damage the hand unit. Dispose of the

used battery properly, keep the battery out of the

reach of children.

WARNING: To avoid possible electrical shock,

turn the electricity off at the main fuse box

before wiring. If you feel you do not have

enough electrical wiring experience, contact a

licensed electrician.

NOTE: Be sure your WINK Hub is plugged

in and within range of your fan. Refer to

Wink HUB user manual for the range.

NOTE: If using a dimmer with these lights, set dimmer at

highest setting for best results.

NOTE: Reset your fan if the pairing is taking longer than

expected. Turn off your fan for 3 seconds, then turn it back

on for 3 seconds. Repeat these steps 5 times. The light will

blink 3 times when factory reset is successful. If the pairing

failed, please reset the device to original setting and re-start

the pairing.

O 1 2 3 4 Breeze

O On

FAN SPEED

FAN LIGHT

FANS

3:19 PMWi-Fi

53%

Fan Light Settings

• During set up, the customer is asked if the fan

has a light kit.

• If your fan has a light, select “Fan Light On.”

• If your fan does not have a light, select “Fan

Light Off.”

• Press SAVE to conrm.

Ceiling Fan

Version

Location

Set Timer

Controller

Settings

Fan Light Settings

Users

Owner

Add a user

Software Version

REMOVE THIS FAN

Hub

Model

Name

Master Bedroom

Statu s

Connected

✓

Timer

When on “fan control screen,” press settings

button in upper right corner to display the

settings panel.

• Select fan to display control panel.

• Scroll down the control panel and select “Set

Timer.”

• Scroll through the hours and minute columns

to select the duration of the timer.

• Press OK to start the timer.

Set Timer

Cancel

hours

min

CEILING FAN

Connect to Wink

3:19 PM

Wi-Fi

53%

Help

Cancel

SUCCESS!

Wink do es not manufacture this pr oduct you have connected. By proceeding,

you acknowledg e and accept that Wink does not gua rantee the performance of

this prod uct you have connected to Wink.

1 2 3 4

DIP

Installing the receiver

WARNING: To reduce the risk of re or electric

shock, remember to disconnect power. The

electrical wiring must meet all local and

national electrical code requirements. The

electrical source and fan must be 110/120 volt,

60Hz. Do not use this product in conjunction

with any variable wall control. Incorrect wire

connection can damage this receiver.

CAUTION: If fan or house wires are a different

color, have this unit installed by a licensed

electrician.

CAUTION: Do not install in a damp location or

immerse in water (For indoor use only). Do

not pull on or cut leads shorter. Do not drop or

bump the unit.

Installation (continued)

NOTE: The ceiling fan must be set at HIGH

speed and light kit (if installed) should be set to

the ON position.

NOTE: For better performance with the WINK

system, the T-Shaped antenna stick should

be mounted to the ceiling outside of the fan’s

ceiling canopy using the pre-mounted double-

stick tape and wood screw (included).

□ Position the house supply wires (AAA) to one side

of the slide-on mounting bracket; position the fan

wires (BBB) to the opposite side.

□ Insert the narrow end of the receiver (as shown, at

side towards the ceiling) into the slide-on mounting

bracket until it rests on top of the ball/downrod

assembly. The canopy comes up to cover the

receiver and bracket.

VIEW AFTER

INSTALLATION

CEILING

WINK antenna

mount to ceiling using wood screw

WINK

antenna

Receiver antenna

AAA

BBB

WINK antenna

Receiver antenna

(Leave connected and do not cut)

Installing the rubber isolated pads

□ Loosen the two screws provided with the outlet

box; insert two rubber isolated pads (F) between

the mounting bracket and the outlet box; rmly

tightened the two screws.

Outlet box

Mounting

Bracket

Installation (continued)

Wiring the receiver to the household wiring

IMPORTANT: Use the wire connecting nuts (AA) supplied with

your fan. Secure the connectors with electrical tape and

ensure there are no loose strands or connections.

WARNING: Each wire not supplied with this fan is designed to

accept up to one 12-gauge house wire and two wires from the

fan. If you have larger than 12-gauge house wiring or more

than one house wire to connect to the fan wiring, consult an

electrician for the proper size wire nuts to use.

□ Spread the wires apart so that the green and white wires are on one

side of the outlet box and the black wire is on the other side.

□ Connect the green fan wires to the household ground wire (this may

be a green or bare wire) using a wire connecting nut (AA).

□ Connect the receiver black (or red) wire to the household black (hot)

wire using a wire connecting nut (AA).

□ Connect the receiver white wire to the household white wire (neutral)

wire using a wire connecting nut (AA).

□ Secure each wire connecting nut using electrical tape.

Black

(or Red)

Black

Green

(or Bare)

Green

Outlet Box

in the ceiling

(MM)

Antenna

White

C (x3)

WARNING: To avoid possible electrical shock, turn the

electricity off at the main fuse box before wiring. If you

feel you do not have enough electrical wiring knowledge or

experience, contact a licensed electrician.

Wiring the fan to the receiver

□ Connect the fan motor white wire to the receiver white wire

using a wire connecting nut (AA).

□ Connect the fan motor black wire to the receiver black wire

using a wire connecting nut (AA).

□ Connect the fan motor blue wire to the receiver blue wire

using a wire connecting nut (AA).

□ Secure each wire connecting nut using electrical tape.

□ Turn the wire connecting nut (AA) upward and push the wiring

into the outlet box (MM).

IMPORTANT: Use the wire connecting nuts (AA)

supplied with your fan. Secure the connectors

with electrical tape and ensure there are no loose

strands or connections.

Outlet box

in the ceiling

(MM)

Blue

Antenna

Black

White

Green

C (x3)

Summary of content (15 pages)

PAGE 1
Installation Pre-Installation WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring experience, contact a licensed electrician. INSTALLATION AND OPERATION CAUTION: Incorrect wire connections will damage this receiver. CEILING FAN WINK ENABLED REMOTE CONTROL CAUTION: To reduce the risk of fire or injury, do not use this product in conjunction with any variable (rheostat) wall control.
PAGE 2
Item #1002 626 170, 1002 703 559 Model #91160, 91161 UL Model #EF200B-44 USE AND CARE GUIDE WELLSTON 44-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday. 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this ceiling fan. We strive to continually create quality products designed to enhance your home.
PAGE 3
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 12 Warranty................................................................................ 3 Care and Cleaning................................
PAGE 4
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.
PAGE 5
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
PAGE 6
Pre-Installation (continued) PACKAGE CONTENTS A E B F C G H I D Part Description Quantity Part Description Quantity A Slide-on mounting bracket (inside canopy) 1 E Light kit fitter assembly 1 B Ball/downrod assembly 1 F Blade 5 C Canopy 1 G Blade bracket 5 D Fan-motor assembly 1 H Glass bowl 1 I LED bulb, 9.5-watts maximum 2 IMPORTANT: This product and/or components are governed by one or more of the following U.S.
PAGE 7
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35lbs. (15.9 Kg) or less”, and use screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
PAGE 8
Assembly - Standard Ceiling Mount 1 2 Preparing for mounting □□ Remove the mounting plate (A) from the canopy (C) by □□ Routing the wires □□ Route the wires exiting the top of the fan motor (D) through the canopy (C) and then through the ball/ downrod assembly (B). loosening the four screws on the top of the canopy (C). Remove the two non-slotted screws (WW), and loosen the slotted screws. This will enable you to remove the mounting bracket (A).
PAGE 9
Assembly - Close-To-Ceiling Mount 1 2 Close-to-Ceiling Mounting □□ Remove the mounting bracket (A) from the canopy (C) by □□ □□ Routing the wires □□ Remove three of the six screws and lock washers (every other loosening the four screws on the top of the canopy (C). Remove the two non-slotted screws (WW) and loosen the slotted screws. Remove the canopy bottom cover (L) from the canopy (C) by depressing the three studs.
PAGE 10
Assembly - Hanging the Fan (continued) 2 3 Hanging the fan WARNING: The hook as shown is only to balance the fan while attaching wiring. Failure to hang as shown may result in hook breaking, causing the fan to fall. The hook must pass from inside to the outside of the canopy. □ Carefully lift the fan motor assembly (D) up to the mounting bracket (A). WARNING: Each wire not supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the fan.
PAGE 11
Assembly - Hanging the Fan (continued) 4 Mounting the fan Close-to-Ceiling mounting WARNING: The locking slots of the ceiling canopy are provided only as an aid to mounting. Do not leave the fan assembly unattended until all four canopy screws are engaged and firmly tightened. WARNING: When using the standard ball/downrod mounting, the tab in the ring at the bottom of the mounting bracket must rest in the groove of the hanger ball.
PAGE 12
Assembly - Attaching the Light Kit 6 Attaching the light kit CAUTION: To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan before installing the light kit. D □□ Remove the three screws (QQ) from the light kit fitter assembly (E) below the fan motor assembly (D). □□ Connect the wires exiting the bottom of the motor assembly □□ 7 (D) by connecting the molded adaptor plugs (SS) together (black to black, white to white).
PAGE 13
Operation Turn on the power and check the operation of the fan. The pull chain controls the fan speeds as follows: 1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - off The appropriate speed settings for warm or cool weather depends on factors such as the room size, ceiling height, and number of fans. The slide switch controls the direction of the blades: forward (switch down) or reverse (switch up) NOTE: Wait for the fan to stop before reversing the direction of blade rotation.
PAGE 14
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □□ Clean your fan periodically to help maintain its new appearance over the years.
PAGE 15
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.