Installation Guide

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly - Attaching without the Light Kit

Operation

Turn on the power and check the operation of the fan. The pull

chain controls the fan speeds as follows:

1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - off

The appropriate speed settings for warm or cool weather depends

on factors such as the room size, ceiling height, and number of

fans.

The slide switch controls (XX) the direction of the blades:

Forward (switch down) or Reverse (switch up).

A. Warm weather - (Forward) A downward airow creates a cooling

effect. This allows you to set your air conditioner on a warmer setting

without affecting your comfort.

B. Cool weather - (Reverse) An upward airow moves warm air off

of the ceiling. This allows you to set your heating unit on a cooler

setting without affecting your comfort.

NOTE: Wait for the fan to stop before reversing the direction of

blade rotation.

A. Warm weather

B. Cool weather

Assembling the fan without light kit

□ Remove the three light kit mounting screws (QQ) from the

switch cup cover (J).

□ In order to use the fan without the light kit, remove the

switch cup cover (J) from the top of the light kit tter

assembly (F) by removing the center hex nut inside the

switch cup cover (J ), and then thread the switch cup cover

off of the threaded nipple on the top of the light kit tter

assembly (F).

□ Position the switch cup cover (J) onto the bracket and

reinstall the light kit mounting screws (QQ).