Installation Guide

Table Of Contents

Assembly - Hanging the Fan (continued)

Making the electrical connection

□ Please refer to remote installation

instructions at the beginning of this

document.

WARNING: Use the wire connecting nuts (BB) supplied with your

fan. Secure the connectors with electrical tape and ensure there

are no loose strands or connections.

WARNING: Each wire nut supplied with this fan is designed to

accept up to one 12-gauge house wire and two wires from the

fan. If you have larger than 12-gauge house wiring or more than

one house wire to connect to the fan wiring, consult an electrician

for the proper size wire nuts to use.

Wrapping the extra wire

□ Gently wrap the excess wire around the mounting

bracket.

□ Secure with electrical tape.

NOTE: Follow this step ONLY if you did not cut the

extra length off from the wires coming from the

ceiling fan.