Instructions / Assembly
5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1
Attaching the mounting unit to the
junction box
Remove the pre-installed cap nuts from the mounting
unit (AA) and put them in a safe location. Attach the
mounting unit (AA) to the junction box (not included) with
the mounting screws (BB).
NOTE: The pre-installed support screws on the mounting
unit (AA) should protrude outaway from the junction box.
AA
BB
2
Making the electrical connections
Connect the copper wire from the light xture (A) to the
mounting unit (AA) by securing it with the pre-installed
ground screw.
Connect the black to black (power), the white to white
(neutral) and copper wire to ground wire with the wire
nuts(CC) and secure them with electrical tape (not
included).
NOTE: If the wires from the xture are the same color,
attach the side with markings or letters to the black
(positive) wire and the other to the white (neutral) wire.
CC
3
Securing the light xture
Secure the light xture (A) to the junction box by placing
it over the pre-installed support screws on the mounting
unit (AA) and securing it with the cap nuts from step 1.
Designed for mounting light xture (A) up or down.
A
AA
4
Installing the light bulb
Remove the pre-installed socket rings from the light
xture (A), add the metal shades (B) and re-secure the
socket rings (DD).
Install one 60-watt max. medium-base lament bulb (not
included).
A
B
DD
B
A