Instructions / Assembly

B
For Customer Assistance:
www.evolutionlightingllc.com
Made In China
1
Installing the mounting bracket
3
Installing the Fixture
Making the electrical connections
Connect the white wires from the fixture to the white wire of
the supply circuit.
Connect the black wires from the fixture to the black wire of
the supply circuit.
Wrap the bare copper grounding wire from the xture around the
green screw on the mounting bracket (B), then connect it to the
grounding conductor of the supply circuit.
Use U.L./C.S.A. listed wire connectors (BB) suitable for the size,
type and number of conductors.
Secure the wire connectors (BB) with U.L./C.S.A. listed electrical
tape.
Place the
xture assembly (A) against the mounting surface,
allowing the preassembled screws on mounting
bracket (B) to pass through the xture assembly (A) and
secure with previously removed canopy nuts (C).
Make the connections to a 120V AC 60Hz circuit.
NOTE:
Carefully unpack and lay all parts on a clean, level surface.
Unscrew the canopy nuts (C) from xture assembly (A) and
detach the mounting bracket (B).
Attach the mounting bracket (B) to the junction box (not included)
with junction box screws (AA).
NOTE: The preassembled screws from the mounting bracket
should be in a horizontal position.
2
4
Installing the shade & light bulb
B
BB
ASSEMBLY INSTRUCTIONS
AA
B
A
C
Remove the pre-attached socket ring (F) from the xture
assembly (A). Place the plate (D) and follow the shade (E) over
the socket on the xture assembly (A), then secure with the
socket ring (F).
Install a 60 Watt Type A Bulb or CFL or LED equivalent (not included).
Restore electrical power when complete.
D
A
E
F