Installation Guide

ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the xture; lay out all parts on clean surface.
2. Tightening center threaded nipple (16) to the nipple extension (12) (part of the
xture main body).
3. Place metal suppose (17) onto center threaded nipple (16).
4. Insert glass shade (18) over center nipple (16), secure by placing one scilicon
washer (19) and metal washer (20) over center threaded nipple (16). Tighten by
using lower lock nut (21).
5. Mount decorative metal base (22) onto glass assembly then tighten bottom nial
(23) onto center threaded nipple (16).
6. Install 60W max. A19 bulbs (not included).
Page 4
ASSEMBLY:
6. Canopy
11. Finishing Nut
Fixture Main Body
Nipple Extension
14. Central Lock Nut
16. Center Threaded Nipple
15. Lower Central Lock Nut
17. Metal Support
19. Silicon Washer
20. Metal Washer
21. Lower Lock Nut
22. Decorative Metal Base
23. Bottom Finial
13. Socket
18. Glass Shade
Page 5