Use and Care Manual

□
□
7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Maintenance
Cleaning and Storage
INSPECTING
If damage to any component is detected, DO NOT use the re pit until repairs are properly performed.
This re pit should be inspected on a regular basis to ensure product safety and longer product life. DO NOT attempt to inspect this re
pit until the re is COMPLETELY out and the re pit has COMPLETELY cooled. Check components for any signs of damage or rust.
□ Wipe exterior surfaces with a mild dishwashing detergent or baking soda.
For stubborn surfaces, use a citrus-based degreaser and a nylon scrubbing brush.
Rinse and clean with water.
Remove built-up residue from components with a chimney cleaning product.
DO NOT move or store this re pit until the re is COMPLETELY out and the re pit is cool to the touch.
Once the re is out, the coals have completely cooled and the re pit can be safely handled, remove and properly dispose of the ashes.
Store the re pit in a clean and dry location to maximize product life.
Store the re pit assembled in a safe location away from children and pets.
□
□
□
□
□
□
NOTE: This re pit should be cleaned on a regular basis to promote safer experiences and longer
product life. After repeated use, a slight discoloration of the nish may occur. DO NOT attempt to clean this
re pit until the re is COMPLETELY out and the re pit has COMPLETELY cooled. DO NOT use oven cleaner
or abrasive cleaners as they will damage this product. DO NOT clean any part of this re pit in a self-cleaning
oven as this may damage the nish.
□