Installation Guide

MOC.YABNOTPMAH.WWW 01
.ecnatsissa rehtruf rof NOTPMAH-DH-558-1 tcatnoc esaelP
Maintenance
□ Shut off the main power supply before performing any maintenance on the light.
□ Wipe with damp cloth or use window cleaner. Do not use abrasives.
Care and Cleaning
□ To clean the outside of the xture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the glass and
surface of the xture.
□ To clean the inside of the xture, rst disconnect power to the xture by turning off the circuit breaker or by removing the fuse at the
fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the inside glass and interior
surface of the xture.
□ Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
Troubleshooting
Problem Possible Cause Corrective Action
The bulb will not light.
The bulb is burned out. Replace the wire bulb.
The power is off. Make sure power supply is on.
There is a faulty wire connection. Check the wiring.
There is a faulty switch. Test or replace the switch.
The fuse blows or circuit breaker
trips when the light is turned on.
There are crossed wires or the power
wire is grounding out.
Check the wire connections.