Installation Guide

MOC.YABNOTPMAH.WWW 6
.ecnatsissa rehtruf rof NOTPMAH-DH-558-1 tcatnoc esaelP
Installation
1
A
Assembling the rod
2
Attaching the glass shade
□ Shut off power at the fuse box or circuit breaker box. If
necessary, remove the old xture and all mounting
hardware from the outlet box. Carefully unpack your new
xture and lay out all the parts on a clear area. Take care
not to lose any small parts necessary for installation.
□ Thread a rod (B) into the nipple on the xture body (E).
Ensure you continue to thread the xture wires through the
rods as you continue. Thread the remaining rods (B)
together as shown rod length will be decided according to
intended. Thread the canopy (A) on top of the rod (B)
assembly.
□ Insert the glass shade (D) into the holder and secure the
shade assembly by adjusting each screw (C) in the holder
(don’t too tighten the screws).
A
B
B
B
B
E
Nipple
C
D
Holder