Installation Guide

MOC.YABNOTPMAH.WWW 8

.ecnatsissa rehtruf rof NOTPMAH-DH-558-1 tcatnoc esaelP

Operation (continued)

Connecting the wires

Installing the fixture

NOTE: If you have electrical questions, consult your local

electrical code for approved grounding methods.

□ While holding the canopy (A) toward the ceiling, connect

the white wire from the xture to the white wire from the

outlet box, and the black wire from the xture to the black

wire from the outlet box. Cover the two wire connections

using the provided wire connectors (AA). Wrap the two wire

connections with electrical tape for a more secure

connection. If your outlet box has a ground wire (green or

bare copper), connect the xture’s ground wire to it using

the wire connector (AA). Otherwise connect the copper

ground from the xture to ground screw (BB) on the

circular strap.

□ Mount the body of the xture on the ceiling by aligning the

protruding mounting screws (FF) all the way through the

holes on the canopy (A). Be careful not to pinch any of the

wires between the xture and the outlet box. Tighten the

xture to the ceiling by screwing the two knurled knobs

(CC) onto the two protruding mounting screws (FF).

Ground Wire

Outlet box

Black Wire

White wire

Outlet box