Installation Guide

Assembly - Hanging the Fan (continued)

Mounting the fan-motor assembly

(close-to-ceiling mount)

□ Carefully unhook the fan from the mounting bracket (A) and

align the locking slots of the ceiling canopy (C) with the two

screws in the mounting bracket (A). Push up to engage the

slots and turn clockwise to lock in place. Immediately tighten

the two mounting screws rmly.

□ Install the two mounting screws (saved from Assembly Step

1 “Prepairing for mounting”) into the holes in the canopy (C)

and tighten rmly.

□ Install the decorative canopy ring (KK) by aligning the ring’s

slots with the screws in the canopy (C). Rotate the ring

clockwise to lock in place.

□ You may now proceed to attaching the fan blades.

WARNING: The locking slots of ceiling canopy are provided only

as an aid to mounting. Do not leave the fan assembly unattended

until all four canopy screws are engaged and rmly tightened.

Assembly - Attaching the Fan Blades

Attaching the blades to the blade

brackets

□ Attach a blade (G) to the blade bracket (H) by inserting

blade attachment screws (HH) in the holes in the blade

(G) and through the blade bracket (H). The rubber

washers are pre-attached to the blade bracket (H).

□ Tighten each screw securely.

□ Repeat these instructions for each blade (G).

NOTE: Your fan blades are reversible. Select the blade side

nish which best accentuates your decor.