Installation Guide

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Assembly - Attaching the Fan Blades (continued)

Fastening the blade assemblies to

the motor

□ Fasten the blade assembly to the fan-motor assembly

(E) by inserting the alignment post into the slot on the

bottom of the motor and tightening the blade bracket (H)

screws. The blade bracket screws (QQ) are pre-installed

into the blade bracket (H).

□ Repeat this step for the remaining blade assemblies.

Attaching the light kit tter assembly

□ Remove the three mounting screws (RR) on the switch

cup cover of the light kit tter assembly (F).

□ Connect the wires from the light kit tter assembly (F)

to the wires from switch cup of the fan motor assembly

by connecting the molded adaptor plugs together (blue

to black, white to white). Carefully tuck all wires and

splices into the switch cup.

□ Align the holes in the light kit tter assembly (F) with the

holes in the switch cup below the fan motor assembly (E)

and install the light kit mounting screws (RR) that were

removed in the rst step above.

CAUTION: To reduce the risk of electric shock, disconnect

the electrical supply circuit to the fan before installing the

light xture.

Assembly - Attaching the Lights