Item #434-940, 526-012, 1001 223 284 Model #52869, 52860, 26829 USE AND CARE GUIDE INDUSTRIAL 60-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday. 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this ceiling fan. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 12 Warranty................................................................................ 3 Care and Cleaning................................
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS A E B F C G D Part Description Quantity Part Description Quantity A Mounting bracket 1 E Blade 3 B Ball/downrod assembly 1 F Wall control 1 C Canopy 1 G Motor 1 D Coupler cover 1 IMPORTANT: This product and/or components are governed by one or more of the following U.S. Patents: 5,947,436; 5,988,580; 6,010,110; 6,046,416, 6,210,117 and other patents pending. 5 HAMPTONBAY.
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35lbs. (15.9kg) or less”, and use screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly 1 2 Dismantling the ball/downrod assembly Installing the downrod □□ Route the wires exiting the top of the motor housing (G) □□ Loosen the hanger ball (H) by removing the set screw (PP) and lockwasher (QQ) at the top of the downrod (B) which holds the hanger ball to the downrod. □□ Slide the hanger ball (H) down the downrod (B) and remove the support pin (RR). □□ Unscrew the green groundwire (I) located at the top of the downrod (B) by unscrewing the screw (SS) on the downrod (B).
Assembly (continued) 3 4 Installing the coupler cover and canopy □□ Slide the coupler cover (D) onto the downrod (B) and push the □□ □□ Installing the ball on the downrod □□ Slide the hanger ball (H) onto the top of the downrod (B) past the holes in the downrod (B). □□ Re-attach the green ground wire (I) to the downrod using the screw (SS) and washer that were removed in step 1. □□ Slide the ball (H) up and align the holes in the ball (H) and downrod (B).
Assembly - Hanging the Fan (continued) 6 7 Hanging the fan □□ Turn the wood screw (AA) into the ceiling. □□ Place the looped end of the safety cable (K) onto the wood WARNING: When using the standard ball/downrod mounting, the tab in the ring at the bottom of the mounting bracket must rest in the groove of the hanger ball. Failure to properly seat the tab in the groove could cause damage to the wiring.
Assembly - Hanging the Fan (continued) 9 VV WARNING: Each wire not supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the fan. If you have larger than 12-gauge house wiring or more than one house wire to connect to the fan wiring, consult an electrician for the proper size wire nuts to use. WW □□ □□ □□ WW WW may be a bare wire or a wire with green colored insulation) to the green ground lead(s) (UU) of the fan.
Operation Install 4-speed wall control See the instructions enclosed with the wall control package. Operating your fan NOTE: Wait for the fan to completely stop before setting the slide switch to reverse the direction of blade rotation. The reverse switch is located on the coupler (J). To switch the direction of the blade rotation, follow the instructions below. □□ Loosen the set screw (ZZ) on the coupler cover (D). □□ Slide coupler cover (D) up to reveal the coupler (J) and reverse switch (YY).
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □□ Clean your fan periodically to help maintain its new appearance over the years.
Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
