Installation Guide

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1 Loop (#1) 3 Glass Shade (#7) 1 Coupling (#5) 3 Screw Shell (#8)
1 Finial (#6)
ASSEMBLY INSTRUCTIONS:
1. Shut off power at the fuse box or circuit breaker box, if necessary remove old fixture
and all mounting hardware from outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area, Take care
not to lose any small parts necessary for installation.
3. Secure the Loop (#1) to the Nipple (#2).
4. Adjust the Arms (#3) to proper position.
5. Secure the Coupling (#5) tightly with Finial (#6), by moving up Coupling (#5) over
Nipple (#4) and making the bottom position of Arms (#3) through the relevant holes
of Coupling (#5).
6. Place Glass Shade (#7) to the Socket Cup and secure in place with Screw Shell (#8)
tightly
.