INSTRUCTION MANUAL 3 Light Pendant Talo Home Depot SKU 528-068 (UPC 718212272138) (Driftwood Finish) LA-2035E/S/F Page 1
Thank you for purchasing this Hampton Bay interior light fixture. This product has been manufactured with the highest standards of safety and quality. FEATURES: 1. Traditional 3 Light Pendant in Driftwood Finish. 2. Timeless Elegant Design. 3. Easy to assemble and install. QUESTIONS, PROBLEMS, MISSING PARTS: Before returning to your local Home Depot, please call our Customer Service Team at 1-877-527-0313 or visit www.homedepot.com.
CAUTION: 1. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. 2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. 3. If you have any non-electrical questions about this fixture, please contact our Customer Service Team at 1-877-527-0313 or visit www.homedepot.com. Please reference your SKU (528-068 Driftwood Finish) or UPC (718212272138 Driftwood Finish). 4.
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale): 3 Rod 1 (#2) 1 Finial (#13) 1 Metal Ring (#7) 3 Screw 2 (#9) 1 Plastic Washer (#6) 1 Glass Shade (#8) 1 Metal Plate (#10) 1 Metal Washer (#5) 1 Nipple (#4) 1 Bottom Cap (#12) 3 Screw 1 (#3) 3 Rod 2 (#11) ASSEMBLY INSTRUCTIONS: 1. Shut off power at the fuse box or circuit breaker box, if necessary remove old fixture 2. 3. 4. 5. and all mounting hardware from outlet box.
ASSEMBLY: 1. Light Cluster Assembly 2. Rod 1 2. Rod 1 3. Screw 1 3. Screw 1 4. Nipple 5. Metal washer 7. Metal Ring 6. Plastic washer 7. Metal ring 8. Glass Shade 11. Rod 2 9. Screw 2 10. Metal Plate 11. Rod 2 12. Bottom cap 13.
PARTS INCLUDED FOR INSTALLATION (parts are not to scale): 1 Ground Screw (#19) 3 Wire Connectors (#24) 1 Nipple (#18) 1 Hex Nut (#23) 1 Ceiling Loop with Chain (#17) 1 Canopy (#16) 1 Lock Washer (#22) 2 Outlet Box Screw (#20) 1 Quick Link (#14) 1 Lock Collar (#15) 1 Crossbar (#21) INSTALLATION INSTRUCTIONS: 1. Thread Nipple (#18) into ceiling Loop (#17) until snug. 2. Thread other end of Nipple with ceiling loop attached into crossbar (#21) until snug. 3.
INSTALLATION: 25. Outlet Box 24. Wire Connector 23. Hex Nut 22. Lock Washer 21. Crossbar Ground Wire 20. Outlet Box Screw Neutral Wire (Ribbed) 19. Ground Screw Hot Wire (Smooth) 18. Nipple 17. Ceiling Loop with Chain 16. Canopy 15. Lock Collar 14. Quick Link 1.
TROUBLESHOOTING: Bulb will not light. Fuse blows or circuit breaker trips when light is turned on. Possible Cause 1. Bulb is burned out. 2. Power is off. Corrective Action 1. Replace light bulb. 2. Make sure power supply is on. 3. Faulty wire connection. 3. Check wiring. 4. Faulty switch. 4. Test or replace switch. Crossed wires or power wire Check wire connections. is grounding out. PRODUCT MAINTENANCE: 1.