Use and Care Manual
□
□
□
□
□
3
Tightening the bolts
□ Once all of the bolts are in place, fully tighten the bolts.
□ Turn the table right side up.
□ Place all parts on the table top (A).
□ Ensure that the table is tightly assembled and stable before use.
D
E
F
6
Assembly (continued)
Operation
TENDING THE FIRE
DO NOT add gasoline, kerosene, diesel fuel, lighter uid or alcohol to relight or enhance an existing re.
Use a match to light the kindling or re-starter.
Wait until glowing coals have developed before adding any additional wood. If additional wood is required,place the wood on top of
the coals, taking care not to shift the ashes.
EXTINGUISHING THE FIRE
Let the re burn itself out.
DO NOT use water to extinguish the re. Such action is dangerous and can cause irreversible damage to the re pit.