FAQ

I changed the light bulbs in my
ceiling fan light kit, and now none of
the lights work.
□ Ceiling fans are required by law to have a light limiter built in prevent over
lamping (180-watt maximum combined power draw). Refer to your ceiling
fan owner’s manual for details about the maximum wattage bulb that you
can put in your fan and not over lamp.
Can I install the ceiling fan without
light kit?
□ No. The light kit must be used with this ceiling fan.
Can I add a remote receiver to
control my ceiling fan?
□ Yes. The ceiling fan is compatible with certain universal ceiling fan
remote/receiver control system. An example remote control set can be
ordered online at www.homedepot.com. Search “202783102.”
Can I use a dimmer switch to
control my fan speed?
□ NO, you should NEVER use a dimmer switch to control a ceiling fan. It will
cause premature wear on the capacitors and the motor. It will also cause
the fan to make noise, as the motor was intended to have a 120v AC power
source at all times. Instead, use a 3-speed wall control.
Can I use this fan outdoors?
□ No, the fan is not designed to work in high humidity (damp or wet)
conditions.
Can I use longer / shorter blades to
replace the original ones?
□ No. You can only use the blades come with the unit in the package. The
blades are designed for the motor, longer or shorter blade could cause
problem and void the warranty.