Use and Care Guide
Table Of Contents
11
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
A
B
EE
C
E
PP
EE
Assembly - Attaching the Blades
Attaching the blade bracket
1
□ Fasten the blade bracket (I) to the motor (E) by inserting the
alignment post into the slot on the bottom of the fan-motor
assembly (E) and tightening the motor screws (GG) that are
pre-assembled to the blade bracket (I).
□ Repeat for the remaining four blade brackets (I).
Attaching the canopy
□ Align the locking slots of the canopy (B) with the two screws
(PP) and alignment post (EE) in the mounting bracket (A).
□ Push up the canopy (B) and turn clockwise until the
alignment post (EE) engages to the round hole and the
screws (PP) engage to the key slots.
□ Firmly tighten the two mounting screws (PP) using a short
screwdriver.
□ Install the decorative bottom cover (C) by aligning the cover
slots with screws in the bottom of the canopy (B). Rotate the
bottom cover (C) clockwise to lock in place.
E
I
GG
7
Assembly - Hanging the Fan (continued)