Installation Guide

Mounting Hardwarea.
(1 hanger pin, 1 locking pin,
1 rubber gasket)
Electrical Hardware & Balancing Kit b.
(3 plastic wire connectors, 1 pull chain
for the fan, 1 pull chain for the light,
blade balancing kit)
Extra Blade Bracket Hardware c.
(1 screw and lockwasher)
Extra Plastic Plug d.
(for non-light kit use)
Decorative Motor Collar Cover6.
Blades (5)7.
Blade Bracket8.
Glass Bowl9.
Bulbs (2)10.
Mounting Plate (inside canopy)1.
Canopy 2.
Ball/Downrod Assembly3.
Fan Motor Assembly with 4.
pre-installed Blade Brackets (4)
Light Fixture5.
2. Unpacking Your Fan
IMPORTANT: THIS PRODUCT AND/OR COMPONENTS ARE COVERED
BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,947,436;
5,988,580; 5,971,573; 6,010,306; 6,039,541; 6,046,416 AND OTHER
PATENTS PENDING.
Unpack your fan and check the contents. You should have the following items: