Instructions / Assembly

Fixings Supplied
Before You Start
• Check the contents of the box and make sure you have all the parts and fittings
listed. If not, contact the Factory by email: [e-mail]
or the Helpline [phone] 2876
• When you are ready to start, make sure that you have the right tools at hand,
plenty of space and a clean dry area for assembly.
Assembly
• Please lay out all nuts and bolts and check lengths before assembly
. It is
recommended that the carton is cut open and spread out on the floor and used as
a protective surface during assembly. Refer to the assembly diagrams as
necessary.
• Important - while every precaution has been made in the manufacture of this
product, care must be taken during assembly in case sharp edges are present.
Page 2
Ref Description illustration Qty Ref Description illustration Qty
A
M8 x 10 Bolt
3 D
M6 Nut
44
B
M8 Large
Washer
Stainless Steel
3 E
M6 Washer
11
C
M6x14 Bolt
12 F
M6x10 Bolt
11
G
M6x12 Dome
Head Bolt
32