Warranty

11
Assembly (continued)
7 Attaching the regulator and propane
bottle
□ Connect the lantern and hose (K) to the regulator (L) and
secure tightly with the adjustable wrenches.
□ Screw the regulator (L) onto the gas cylinder (turn
clockwise to tighten it securely).
□ Position the gas cylinder inside the cylinder chamber as
shown securing with the chain.
□ Perform a Leak Test (see page 15).
8 Fitting the reector handle
□ Using the pre-tted R-clip (1) and pin (2), secure the
reector handle (M) to the bracket as shown.
NOTE: THE CYLINDER MUST BE POSITIONED AS SHOWN IN
THE PATIO HEATER CYLINDER CHAMBER TO PROVIDE VAPOR
WITHDRAWAL.
M
L
2 1
K