Installation Guide

Installation

Installing the light

IMPORTANT: Prior to use, remove the battery

isolator tag (F) inserted in the battery compartment

and allow to charge a full sunny day.

NOTE: Do not use a hammer. If the ground is hard,

use water to soften.

□ Insert the ground stake (D) firmly into the ground at the installation location. If the ground is too hard, soak the

ground with water to soften the ground or drive a metal rod or screwdriver into the ground to create a hole for the

ground stake (D).

□ Connect the pole (C) to the ground stake (D).

□ Connect the lamp housing assembly (A & B) to the pole (C).