SDS

THE COPYRIGHT BELONGS TO TINNO MOBILE TECHNOLOGY CORP.
2021-5-6
All Rights Reserved
Page 6 of 25 Pages
When
discharge
放电时
0~60℃
1C constant current
discharge to 3V
1C 恒流放电到 3.0V
-20~0℃
0.2C constant current
discharge to 3V
0.2C 到 3.0V
17
Storage temperature
贮存温度
-5℃-35℃
recommended 推荐（25
±5℃）
Storage should be
charged to 40%~50% of
capacity
贮 存 时 应 充 电 至 容 量 的
40%~50%
18
ID resistance
ID 电阻
82K ±1%
19
NTC resistance
NTC 电阻.
10KΩ±1%
B 值 3435 25℃
20
0V charging function
0V 充电功能
有
21
Cycle life
循环寿命
400 次≥80%标称容量
22
Gold plating thickness
五金镀金厚度
≥0.2um
23
Nickel plating
thickness
五金镀镍厚度
≥6um
24
Shipment voltage
出货电压要求
3.93-4.0V
25
Battery thickness
(Shipment voltage)
电池厚度（出货电压）
4.2±0.1 mm
26
Battery thickness (full
charge)
电池厚度（满电）
Max4.53mm
27
Battery thickness
(after cycle)
电池厚度（循环后）
Max4.73mm
28
Battery weight
成品电池重量
42.3g
3、 Test requirements 测试要求
Supplier is required to test battery before shipping, including but not limited to the key evaluation items
in this standard, adding test results to the specification. Test report of each test shall be provided in the
required format. Reliability test must have photos of product before and after test or test video.