Installation Guide

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Installation
PLANNING INSTALLATION
keep the warranty valid.
NOTE:
It is very important to properly coat the countertop with a high quality oil. Finish the counter top surface with
the oil, wax oil, or varnish.
excessive sanding and wood warpage.
NOTE: Ideally, wooden countertops should be used in an ambient temperature of 65°F - 75°F (18°C - 24°C)
and humidity of 40-60 %.
The following features are completely natural for wood:
□ Differences in color, grain, and will have some knots.
□ Wood darkens with time.
□
□ Wood absorbs moisture from the environment and gives it back, which can make it expand or contract.
TO AVOID CRACKING AND SPLITTING OF WOOD:
□ The installation must allow the wood to move (expand/contract):
□
□ Keep a 1/8 in. gap at the wall.
□ Holes in the brackets or blocks must be oversized to allow the fastener to keep the top secure but allow the top to move.
□
□ Protecting the underside is as important as protecting the top.
□ Seal the top, bottom and all edges.
□ Additional protection may be required above dishwashers.
□ Protect wood-to-wood joints.
□ Seal edges with a water-resistant sealant prior to connecting the joints.
□ Use mechanical fasteners to pull and hold joints together.