Installation Guide
Table Of Contents
9 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Care and Cleaning (continued)
REMOVING A DENT FROM YOUR TOP
WARNING: Irons and steam are extremely hot and can
burn you. Please use caution.
□ Finished tops will require you to sand the area till the nish is gone.
■ Use the nest sandpaper to take off the nish (220 grit for oil, to 150 grit for polyurethane nish).
NOTE: Always sand in the direction of the wood grain.
■ Remove the dust with a damp cloth.
□ Steam the dent with a hot iron and water.
■ Fill the dent with water and let sit for 90 seconds.
■ Fold in half a damp cotton towel and place over the dented area.
■ Iron in a circular motion for about 60 seconds or if cloth becomes dry.
■ Remove cloth and inspect the dent. Repeat the process 3-4 times for best results.
NOTE: Never let the iron come in contact with the wood.
□ Sand and renish.
■ Lightly sand the area with 220 grit sandpaper.
■ Wipe clean with a damp cloth.
■ Renish/nish per nish manufacturer’s instructions.