Instructions / Assembly

Assembly - Hanging the Fan

Attaching the fan to the electrical box Hanging the fan

□ Pass the 120-Volt supply wires through the center hole in the

mounting bracket (A).

□ Install the ceiling mounting plate on the outlet box by sliding the

mounting bracket (A) over the two screws (NN) provided with the

outlet box. If necessary, use leveling washers (not included) be-

tween the mounting bracket (A) and the outlet box. Note that the

at side of the mounting bracket (A) is toward the outlet box.

□ Securely tighten the two mounting screws (NN).

□ Carefully lift the fan-motor assembly (D) up to the slide-on

mounting bracket (A).

□ Seat the hanger ball portion of the ball/downrod assembly (B)

in the mounting bracket socket. Ensure that the tab on the

slide-on mounting bracket (A) socket is properly seated in the

groove in the hanger ball.

4 5

WARNING: To reduce the risk of re, electric shock or

personal injury, mount to outlet box marked “acceptable

for fan support of 35lbs. (15.9 Kg) or less” and use screws

provided with the outlet box.