Instructions / Assembly

9
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Hanging the Fan (continued)
Making the electrical connection
□ The fan comes with 54 in. lead wires for use with an extended
ball/downrod assembly. If using the 4.5 in. ball/downrod (B)
provided, you can cut the lead wires to your desired length
(no shorter than 12 in.). This will make extra room in the
canopy (C), if you do not wish to cut the wires, you will need
to neatly wrap them.
□ Connect the fan motor green wire to the household green or
bare wire using a wire connecting nut (BB).
□ Connect the fan motor white wire to the household white wire
using a wire connecting nut (BB).
□ Connect the fan motor black and blue wires to the household
black wire using a wire connecting nut (BB).
□ Secure each wire connecting nut using electrical tape.
□ Turn the wire connecting nut (BB) upward and push the wiring
into the outlet box (MM).
6
IMPORTANT: Use the plastic wire connectors supplied with your
fan. Secure the connectors with electrical tape and ensure there
are no loose strands or connections.
WARNING: Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more than
one house wire to connect to the fan wiring, consult an electrician
for the proper size wire nuts to use.
Outlet box
in the ceiling
MM
Green or bare wire
Black White
Blue & Black
White Green
Wrapping the extra wire
7
□ Gently wrap the excess wire around the mounting bracket.
□ Secure wires with electrical tape.
NOTE: Follow this step ONLY if you did not cut the extra
length from the wires coming from the ceiling fan.