Installation Guide

9
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Hanging the Fan (continued)
Hanging the fan
□ Carefully lift the fan motor assembly (D) up to the mounting
bracket (A).
□ Seat the hanger ball portion of the ball/downrod assembly (B)
in the mounting bracket socket. Ensure that the tab on the
mounting bracket (A) socket is properly seated in the groove
in the hanger ball. If using close-to-ceiling mounting, hang the
fan on the hook provided by utilizing one of the holes at the
outer rim of the ceiling canopy (C).
5
WARNING: The hook is only to hold the fan while attaching
wiring. Failure to hang the fan properly by following these
instructions may result in the hook breaking, causing the fan
to fall. The hook must pass from inside to the outside of the
canopy.
CC
A
A
B
D
D
Making the electrical connection
□ The fan comes with 54in. lead wires for use with and
extended ball/downrod (B) provided, you can cut the lead wire
to your desired length (no shorter than 12in.) This will make
extra room in the canopy (C). if you do not wish to cut the
wires, you will need to neatly wrap them.
□ Connect the fan motor green wires to the household green or
bare wire using a wire connecting nut (BB).
□ Connect the fan motor white to the household white wire
using a wire connecting nut (BB).
□ Connect the fan motor black and blue wires to the household
black wire using a wire connecting nut (BB).
□ Secure each wire connecting nut (BB) using electrical tape.
□ Turn the wire connecting nut (BB) upward and push the wiring
into the outlet box (NN).
6
WARNING: Use the wire connecting nuts (BB) supplied with your
fan. Secure the connectors with electrical tape and ensure there
are no loose strands or connections.
WARNING: Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more than
one house wire to connect to the fan wiring, consult an electrician
for the proper size wire nuts to use.
Green or bare wire
Black
White
Green
Blue
Outlet box
in the ceilling NN