Outdoor Ceiling Fan User Manual

8.
Attaching the Fan
Blades
NOTE: Your fan blades are reversible. Select
the blade side finish which best accentuates
your decor.
Your fan features revolutionary advancements
for quick and easy blade installation.
The screws are already installed on the
blade arms, attach the blade arm support
plate and blades to the blade arms using the
screws already installed on the blade arms.
Be sure the screws on the blade arms slide
to the narrow portion of the key hole slot on
the blade arm support plate, by pushing the
tab back until the rectangle plastic band falls
into the hole on the blade (this locks the
blade assembly). To remove the blade from
the blade arm, pull the rectangle plastic
band up and slide the screws toward the
wide portion of the key hole slot on the
blade support plate. This will loosen the
blade and blade arm support plate and this
will allow you to remove the blade from the
blade arm. (Fig. 16)
Fasten blade assembly to motor using the
screws supplied. (Fig. 17)
Figure 17
Figure 15
WARNING
TO REDUCE THE RISK OF PERSONAL
INJURY, DO NOT BEND THE BLADE
HOLDERS WHILE INSTALLING, BALANCING
THE BLADES, OR CLEANING THE FAN. DO
NOT INSERT FOREIGN OBJECTS BETWEEN
ROTATING FAN BLADES.
CAUTION
Remove 5 rubber packing mounts from
fan motor assembly and discard before
installation. (Fig. 15)
Rubber packing
mounts
Screws
Figure 16
Blade arm
Tab
Blade arm
support plate
Blade
Rectangle
plastic band
Screws
Blade arm