Item #1005 806 125 Model #52119 UL Model #52-HASL USE AND CARE GUIDE NORTH GROVE 52-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM To view an instructional video on how to install this product: 1. Go to www.homedepot.
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 14 Warranty................................................................................ 3 Care and Cleaning................................
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier warrants that the light kit, excluding any glass, to be free from defects in workmanship and material at the time of shipment from the factory for a period of three years after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS A G H B C I D J Part Description E K F L Quantity Part A Slide-on mounting bracket (inside canopy) 1 B Ball/downrod assembly 1 C Canopy 1 D Decorative motor collar cover 1 E Fan-motor assembly 1 L F Blade 5 Description Quantity G Light kit fitter assembly 1 H Decorative cage 1 I Bulb 2 J Receiver 1 K Remote control 1 Extension lead wire 1 IMPORTANT: This product and/or components are governed by one or more of
Installation MOUNTING OPTIONS NOTE: You may need a longer downrod to maintain proper blade clearance when installing on a steep, sloped ceiling. The maximum angle allowable is 20° away from horizontal. WARNING: To reduce the risk of fire, electric shock, or personal injury, mount the fan to an outlet box marked “Acceptable for fan support of 35 lbs (15.9 kg) or less” and use the screws provided with the outlet box.
Assembly - Standard Ceiling Mount 1 2 Preparing for standard mounting □ Remove the magnetic canopy bottom cover (HH) from the □ □ Routing the wires □ canopy (C) by pulling it off. Loosen the two canopy screws (GG) located in the bottom of the mounting bracket (A). Turn the mounting bracket (A) counterclockwise and lift it up to remove the mounting bracket from the canopy (C).
Assembly - Hanging the Fan 1 2 Attaching the fan to the electrical box Hanging the fan □ Carefully lift the fan-motor assembly (E) up to the slide-on WARNING: To reduce the risk of fire, electric shock, or other personal injury, mount the fan to an outlet box or supporting system marked “Acceptable for fan support of 35 lbs (15.9 kg) or less” and use the mounting screws provided with the outlet box. mounting bracket (A).
Assembly - Hanging the Fan (continued) 3 Setting the code on the remote control and receiver O NOTE: The frequencies on your receiver and hand unit have been preset at the factory. Before installing the receiver, make sure the dip switches on the receiver and hand unit are set to the same frequency. The dip switches on the hand unit are located inside the battery compartment. D NOTE: The switch marked “O/D” controls the dimming function of the lights.
Assembly - Hanging the Fan (continued) 5 6 Wiring the receiver to the household wiring WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician. Wiring the fan to the receiver NOTE: The fan comes with 12 in. lead wires for use with the provided 6 in. ball downrod assembly (B).
Assembly - Hanging the Fan (continued) 7 Mounting the fan-motor assembly (standard mount) WARNING: When using the standard ball/downrod mounting, the tab in the ring at the bottom of the mounting bracket must rest in the groove of the hanger ball. Failure to properly seat the tab in the groove could cause damage to the wiring. GG A C NOTE: The magnet is pre-attached on the canopy bottom cover for you to remove and install easily.
Assembly - Attaching the Light 1 Installing the decorative cage □ Push the decorative cage (H) up to the black bracket and align □ □ the three holes on the decorative cage (H) with the holes on the black bracket. Install the screws (DD) to secure the decorative cage (H) properly. Make sure all the screws are firmly tightened.
Assembly - Attaching the Accessories Mounting the remote control holder NOTE: Screw wall anchors are included for extra support. The included screws are designed to screw easily into the wall. If you would like a more permanent or secure hold, install the wall anchors prior to attaching the wall cradle to the wall. Screw cover plate □ Slide the screw cover plate up to remove it from the wall □ □ cradle.
Operating Your Fan and Remote Control Remote control - Your fan is equipped with a remote control to operate the speed and lights of your new ceiling fan. The speed setting for warm or cool weather depends on factors such as the room size, ceiling height, number of fans and so on. The fan is shipped from the factory with the reversing switch (YY) positioned to circulate air downward.
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □ Clean your fan periodically to help maintain its new appearance over the years.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.
Artículo Núm.1005 806 125 Modelo Núm. 52119 Modelo Núm. 52-HASL Aprobado por UL GUÍA DE USO Y MANTENIMIENTO VENTILADOR DE TECHO NORTH GROVE DE 1.3 M ¿Preguntas, problemas, piezas faltantes? Antes de devolverlo a la tienda, llama al Servicio al Cliente de Hampton Bay de lunes a viernes, entre 8:00 a.m. a 7:00 p.m. (hora del Este), y los sábados de 9:00 a.m. a 6:00 p.m. (hora del Este) 1-855-HD-HAMPTON HAMPTONBAY.COM Para ver un video instructivo sobre cómo instalar este producto: 1. Visita www.homedepot.
Tabla de contenido Tabla de contenido............................................................... 2 Ensamblaje............................................................................ 7 Información de seguridad................................................... 2 Funcionamiento.................................................................. 14 Garantía................................................................................. 3 Mantenimiento y limpieza.....................................
Garantía El proveedor garantiza de por vida, a partir de la fecha de adquisición por el comprador original, que el motor del ventilador no presenta defectos de fabricación ni de materiales al momento del envío desde la fábrica. El proveedor garantiza que el kit de luces, excluyendo cualquier vidrio, no tendrá defectos de fabricación ni de material en el momento del envío desde la fábrica por un período de tres años después de la fecha de compra por parte del comprador original.
Preinstalación (continuación) HERRAJES INCLUIDOS NOTA: Los herrajes no se muestran en su tamaño real.
Preinstalación (continuación) CONTENIDO DEL PAQUETE A G H B C I D J Pieza A Descripción E K F L Cantidad Soporte de montaje deslizante (dentro de la cubierta) 1 B Conjunto de tubo bajante/esfera C D Pieza Descripción Cantidad G Conjunto del soporte del kit de luces 1 H Carcasa decorativa 1 1 I Bombilla 2 Cubierta 1 J Receptor 1 Cubierta decorativa del collarín del motor 1 K Control remoto 1 E Conjunto motor-ventilador 1 L Extensión de cable terminal 1 F Aspa
Instalación OPCIONES DE MONTAJE NOTA: Tal vez necesites un tubo bajante más largo, para mantener la altura mínima adecuada de las aspas, al instalar el ventilador en un techo inclinado. El ángulo máximo permitido es 20º desde la línea horizontal. ADVERTENCIA: Para reducir el riesgo de incendio, descarga eléctrica o lesiones personales, instala en una caja eléctrica clasificada como “Apropiada para sostener ventiladores de 35 lb (15.9 kg) o menos” y usa los tornillos que vienen con ella.
Ensamblaje - Montaje estándar en techo 1 □ □ □ 2 Preparación para el montaje estándar Cómo tender los cables □ Retira la tapa inferior magnética (HH) de la cubierta (C), tirando de ella hasta soltarla. Afloja los dos tornillos de la cubierta (GG) ubicados en la parte inferior del soporte de montaje (A). Gira el soporte de montaje (A) hacia la izquierda y levántalo para retirarlo de la cubierta (C).
Ensamblaje - Cómo colgar el ventilador 1 2 Cómo fijar el ventilador a la caja eléctrica ADVERTENCIA: Para reducir el riesgo de incendio, descarga eléctrica o lesiones personales, instala sólo en una caja eléctrica o sistema de soporte marcado como “Apropiado para sostener ventiladores de 35 lb (15.9 kg) o menos”, y usa sólo los tornillos de montaje incluidos con la caja eléctrica.
Ensamblaje - Cómo colgar el ventilador (continuación) 3 Cómo configurar el código del control remoto y el receptor NOTA: Las frecuencias del receptor y de la unidad de mano han sido preconfiguradas en la fábrica. Antes de instalar el receptor, asegúrate de que los interruptores en línea del receptor y de la unidad de mano estén configurados en la misma frecuencia. Los interruptores en línea en la unidad de mano están ubicados dentro del compartimiento de la batería.
Ensamblaje - Cómo colgar el ventilador (continuación) 5 6 Cómo cablear el receptor al cableado del hogar ADVERTENCIA: Para evitar posible descarga eléctrica, desconecta la electricidad en la caja principal de fusibles antes de cablear. En caso de no tener suficiente conocimiento o experiencia sobre cableado eléctrico, contactar a un electricista certificado. NOTA: El ventilador viene con cables terminales de 12 plg (30.5 cm) para usar con el conjunto de tubo bajante/esfera (B) de 6 plg (15.
Ensamblaje - Cómo colgar el ventilador (continuación) 7 Cómo montar el conjunto motorventilador (montaje estándar) ADVERTENCIA: Cuando uses el conjunto del tubo bajante/ esfera estándar, la pestaña en el aro en la parte inferior del soporte de montaje debe encajar en la ranura de la bola de soporte. Si la pestaña no se asienta correctamente en la ranura, se puede dañar el cableado. GG A C NOTA: El imán viene prefijado en la tapa inferior de la cubierta para quitar e instalar fácilmente.
Ensamblaje - Cómo montar la luz 1 □ □ □ Cómo instalar la carcasa decorativa Empuja la carcasa decorativa (H) hasta el soporte negro y alinea los tres orificios en la carcasa decorativa (H) con los orificios en el soporte negro. Instala los tornillos (DD) para asegurar la carcasa decorativa (H) correctamente. Comprueba que todos los tornillos estén firmemente apretados.
Ensamblaje — Cómo montar los accesorios Montaje del soporte del control remoto NOTA: Se incluyen anclajes de pared con tornillos para soporte adicional. Los tornillos incluidos están diseñados para atornillarse fácilmente en la pared. Si deseas una sujeción más permanente o segura, instala los anclajes de pared antes de fijar el soporte de pared a la pared. □ □ □ Placa de cubierta de los tornillos Desliza la placa de la cubierta de los tornillos hacia arriba para quitarla del soporte de pared.
Cómo usar tu ventilador y control remoto Control remoto - Tu ventilador está equipado con un control remoto que controla la velocidad y las luces. Las configuraciones de velocidad para clima cálido o frío dependen de factores como el tamaño de la habitación, la altura del techo, la cantidad de ventiladores y demás. El ventilador se envía desde la fábrica con el interruptor de reversa (YY) colocado para hacer circular el aire hacia abajo.
Cuidado y limpieza ADVERTENCIA: Asegúrate de que la corriente esté cortada antes de limpiar el ventilador. □ □ □ □ Debido al movimiento natural del ventilador, algunas conexiones pueden aflojarse. Revisa dos veces al año las conexiones de soporte, los soportes y los accesorios de las aspas. Comprueba que estén seguros. No es necesario desmontar el ventilador del techo. Limpia el ventilador con frecuencia para que luzca como nuevo con el paso de los años.
¿Preguntas, problemas o piezas faltantes? Antes de devolverlo a la tienda, llama al Servicio al Cliente de Hampton Bay de lunes a viernes, entre 8:00 a.m. a 7:00 p.m. (hora del Este), y los sábados de 9:00 a.m. a 6:00 p.m. (hora del Este) 1-855-HD-HAMPTON HAMPTONBAY.COM Conserva este manual para uso futuro.