Installation Guide
Table Of Contents
5
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installing the light kit for fans
without pull chains
Installing the light bulbs and glass
shades for fans with pull chains.
□ Remove the compressing ring (FF) from the threadedsocket of
the light kit by turning thecompressing ringcounterclockwise
until it unlocks.
□ Insert the glass shade (B) into the light kit cowling andturn
the compressing ring (FF) clockwise to tightenand secure the
glass shade. Repeat for theremaining shades.
□ With power off, screw the LED bulbs (C)into the sockets.
□ Remove the compressing ring (FF) from the threadedsocket of
the light kit by turning thecompressing ringcounterclockwise
until it unlocks.
□ Insert the glass shade (B) into the light kit cowling andturn the
compressing ring (FF) clockwise to tightenand secure the glass
shade. Repeat for theremaining shades.
□ With power off, screw the LED bulbs (C)into the sockets.
□ Attach the pull chain extensions (AA) to the light pull chain and
fan pull chain.
5
4
Installation (continued)
CAUTION: You must rst turn the light on by using the
pull chain prior to using the remote control to operate
the light.
E
C
A
B
FF
AA
B
C
A
E
FF